Cloning the System Settings

About

Cloning system settings allow you to easily copy system settings from one console (parent console) to many consoles (child consoles). This method copies the Connectivity, Display, Media, and Workout Limits settings. Both the parent and child consoles must be mounted on the same equipment type.

Basic steps

  1. Export the parent console system settings to a USBShort for Universal Serial Bus, is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. flash drive, see Exporting the system settings.
  2. Import the system settings from the parent console USB flash drive to the child console, see Importing the system settings.

Exporting the system settings

  1. Insert a USB flash drive into the console chin USB port.
  2. Access Service menu (51765761) > Settings menu.
  3. Select System Settings > Manage Settings.
    • If the "Please insert USB" message shows, either the USB drive was not inserted or the USB drive format is not supported or is corrupted.
  4. Select the Export to USB icon to begin the export system settings process.
  5. Wait for the "Settings exported successfully to the USB drive" message and then select OK to complete the system settings export.
  6. Return to the "Welcome" banner and then remove the USB drive.

IMPORTANT:  .Return to the "Welcome" banner before removing the USB drive.

Importing the system settings

  1. Insert the cloned system settings USB drive into the child console chin USB port
  2. Access Service menu (51765761) > Settings menu.
  3. Select System Settings > Manage Settings.
    • If the "Please insert USB" message shows, either the USB drive was not inserted or the USB drive does contain a compatible system setting file.
  4. Select the Import from USB icon to begin the export process.
  5. Wait for the "Imported settings successfully" message and select OK to complete the settings import.
  6. Verify that the Connectivity, Display, Media, and Workout Limits system settings have imported correctly.
  7. Return to the "Welcome" banner and then remove the USB drive.

IMPORTANT:  .Return to the "Welcome" banner before removing the USB drive.

 

 

 

 

 

Contact Precor Customer Support (Ph 800.786.8404) with any questions.

Copyright 2016 Precor Incorporated