Belt/Chain Guard Cover Replacement
About
This procedure provides instruction to remove and install the front and rear Belt/Chain Guard Covers.
The front belt/chain guard includes an access panel used to access the tensioner nuts and right axle nut. The rear cover includes a chain tension window that allows you to verify the chain tension. It is easiest to remove the rear guard cover first and then the front guard cover, install in reverse order. All rear guard fasteners must be removed before the front guard can be removed.
Available Movies
|
Belt/Chain Guard Cover Replacement |
Procedure
Review entire procedure before starting.
Removal instructions
-
Remove the rear belt guard cover
by removing the fasteners (4x) using a 5 mm hex key. Remove stared fastener last. Retain part(s) and/or fastener(s) for installation.
Front Access Panel guard cover removal instructions
- Remove the front guard access panel
by removing the one fastener using a 5 mm hex key. Retain part(s) and/or fastener(s) for installation.
Front Belt/Chain Panel guard cover removal instructions
- Remove the front belt/chain guard cover
by removing the fasteners (4x) using a 5 mm hex key. The back cover bolts need to be removed to remove the front cover. Carefully slide the front cover over the pedal crank arm to remove. Retain part(s) and/or fastener(s) for installation. - Install the belt/ chain guard covers in reverse order:
- First install front cover and access panel .
- Then install the back cover . It is easiest to install the stared fastener first to hold cover in position.
- First install front cover
Installation Instructions
See Also