Pedal Replacement

About

This procedure provides instruction to remove and install the Pedals.

The pedals are dual-sided SPD^® compatible pedal attached to oversized crank arms utilizing the patented Morse taper connections.

Available Movies

Pedal Replacement tutorial video.

Specifications

System Component	Specification
Pedal fastener	TorqueTorque is a measure of the force that can cause an object to rotate about an axis. Bolt/nut example: 5 nM torque is equivalent to 5 newtons of force applied one meter from the center of the bolt, 6 ft-lb is equivalent to 6 lb of force applied 1 foot away from the center of the bolt. 33 ft-lb (45 N•m)

Specialized Tools

Tool		Part Number	Qty
Crank Extractor (used to remove pedal)		X-Tools Crank Extractor)(1) or similar	1

Procedure

Review entire procedure before starting.

CAUTION: Be careful not to scratch or dent bike with tools during the removal/installation process.

Removal Instructions

1. Position the crank arm and right pedal to the 12 o'clock position.
2. Remove the pedal mounting bolt using an 8 mm hex key. Retain part(s) and/or fastener(s) for installation.



3. Use a crank puller (recommended PN X-Tools Crank Extractor or similar) to press the pedal out of the crank arm and remove.





4. Repeat steps to remove the left pedal.

Installation instructions:

5. Insert the right pedal into the right crank arm. Seat the pedal by using a rubber mallet to lightly tap the center of the pedal into the crank arm.



6. Secure pedal with the pedal mounting bolt using an 8 mm hex key, torque to 33 ft-lb (45 N•m).



7. 
8. Repeat installation steps to install the left pedal.
9. Verify the bike operation per Operation Verification Checklist and return to service

See Also

Replacement Procedures