E-Stop Not Communicating
The error 37 is generated by the upper PCAPrinted circuit assembly, generally referred to as either an upper PCA or lower PCA. in the console when the lower control module gets into an E-Stop state and the upper PCA in the console did not know about it. The system uses pin 8 of the data cable to communicate E-Stop states between the console and the lower control module.
Related Error Codes
E-Stop error code: 37.
Refer to the Error Code Troubleshooting Guide for error code description and troubleshooting information.
Procedure
Refer to the Error Code Troubleshooting Guide for error code description and troubleshooting information.
See Also