Handlebar Adjustment Knob Replacement
About
This procedure provides instruction to remove and install the Handlebar Adjustment Knob.
Procedure
Review entire procedure before starting.
Removal Instructions
- Remove the handlebar assemble, see Handlebar Assembly Replacement.
- Fully tightening the handlebar adjustment knob. This will push the locking nut slightly above the bottom edge of the adjustment knob bracket mounting hole enough to place a thin wall deep socket onto the 5/16" locking nut.
- Then use a thin wall deep 5/16' socket to hold the locking nut from turning while loosening the adjustment knob to remove. Keep light pressure on the adjustment knob while loosening.
Installation instructions
- Reinstall the handlebar adjustment knob in reverse order.
- Reinstall the handlebar assembly and verify the handlebar adjustment knob operation, see Handlebar Assembly Replacement.
See Also