Standard Service Menus

About

The Standardized Service Menus are supported across Precor cardio product lines designed to allow servicers and clubs to manage, configure/setup, and maintain/test the equipment: The service menus are grouped into functional service categories depending on the console type as follows:

LED Consoles
(P10, P30, P30i and P31) 		Touchscreen Consoles
(P62, P80, and P82)
  • Hardware Validation (51765761)
  • Club Settings (5651565)
  • Information Display (65)
  • Service Menus (51765761)
  • Club Settings (5651565)

On LED consoles, there are three service menus grouped by function; the Hardware Validation menu provides a set of automated diagnostic tests used to troubleshoot, calibrate, and verify machine operation, the Club Settings menu is used to configure the equipment workout settings, and the Information Display menu provides information about the equipment hardware, software, usage, and error log data.

On touchscreen consoles, there are two service menus; one intended for service technicians (the Service menu) and one intended for club operators (Club Settings menu). The Service Settings menu provides access to all available equipment service menus used by service technicians to service and maintain the equipment. The Club Settings menu is a subset of service menus directed toward club operation used by club operators to manage, configure, and maintain the equipment.

Each service menu is assigned a unique service access code. To access a service menu, type in the access code at the service menu login, see Standard Service Menus.

Service Access Codes

ClosedService Access Codes

LED Consoles: P10, P30, P30i and P31

SERVICE
ACCESS CODE
SERVICE MENU
FUNCTION

51765761

Hardware Validation

Set of automated diagnostic tests used to troubleshoot, calibrate, and verify machine operation.

5651565

Club Settings

Used to configure the club specific workout, console and maintenance reminder settings.

65

Information Display

Used to access the equipment usage, hardware, software, error code, and maintenance information.

Touchscreen Consoles: P62, P80, and P82

SERVICE
ACCESS CODE
SERVICE MENU
FUNCTION

51765761

Service Menus

Service Menu access code provide access to all available equipment service menus used to service, configure, test, and maintain the equipment including the legacy Information Display, Club Settings, and Hardware Validation Diagnostic Tests menus.

5651565

Club Settings

Club Settings access code is a subset of service menus directed toward club operation, used by club operators to manage, configure, and maintain the equipment.
Note: Service access code 65 "Information Display" is not used on touchscreen consoles.

How to Access the Service Menus

ClosedP10, P30, P30i and P31 LED consoles

Steps:

  • On P10/P30 consoles: Press the PAUSE hardkey and immediately use the keypad to type in the access code.

  • On P30i consoles: Press the PAUSE hardkey and immediately use the INCLINE number keys to type in the access code.

 

ClosedP80 touchscreen console

Steps

  1. Make sure the P80 is set to the Welcome home page.
  2. Press and hold the Pause key while pressing CH up >VOL down > VOL up > CH down:
  3. Use the touch keypad to type in the service access code.

    4.  

ClosedP62 and P82 touchscreen consoles

Diagnostics menu access

Steps

  1. Make sure the console is set to the Welcome banner.
  2. Press and hold the VOL down key while pressing CH up >CH down > CH down > CH up:
  3. At the Sign-In screen, type in the service access code.

Touchscreen Calibration shortcut

Console shortcut to access the Touchscreen Calibration test.

Steps

  1. Make sure the console is set to the Welcome banner.
  2. Press and hold the VOL down hardkey while pressing CH up > Pause > Pause > CH up:
  3. Touch the designated display positions and follow prompts to complete the touchscreen calibration.

Debug Information Report shortcut

Console shortcut to download an event log debug information report.

Steps

  1. Make sure the console is set to the Welcome banner.
  2. Insert a USBShort for Universal Serial Bus, is an industry standard developed in the mid-1990s that defines the cables, connectors and communications protocols used in a bus for connection, communication, and power supply between computers and electronic devices. flash drive into the Chin USB port.
  3. Press and hold the VOL Up hardkey while pressing CH up > CH Dwn > CH Dwn > CH up:
  4. Wait for the download to finish and then remove the USB drive.
IMPORTANT:  Do not remove the USB drive until the "Report was successful" message is shown, (approx. 1 min).

 

Navigating the Service Menus

ClosedP10, P30, & P30i LED consoles

LED console service menus are organized in a sequential top-menu to sub-menu item architecture. Select the tip level menu and sequentially navigate through the sub-menus until the particular item is found. Then return to the top-level menu to select a different menu item. Refer to the following tables for console hardkey and keypad functions.

P10 and P30 consoles

CONSOLE KEY FUNCTION/DESCRIPTION

Up/Down

Scrolls up and down through the current menu.

OK

Selects the current menu item or confirms settings.

BACK/CLEAR

• Returns to the previous menu level without saving changes.

• Hold Back to exit the Display test.

PAUSE

• Exits service mode

• Press and hold PAUSE for greater than 6 sec will open the Error Log or show the "Stuck Key" message when there are no logged errors.

Numeric Keypad

Use to type in numeric inputs (e.g. access codes).

P30i consoles

Available exclusively on the 700 Line Treadmill, the P30i Interval Console is an easy-to-use console that facilitates interval training with one-touch speed and incline keys.

CONSOLE KEY FUNCTION/DESCRIPTION

SPEED 1/2 - DWN/UP (US std)

SPEED 2/4 - DWN/UP (metric)

Use the SPEED numeric 1 & 2 keys to scroll up and down through the current menu.

OK or INCLINE 0

Selects the current menu item or confirms settings.

INCLINE 0

Returns to the previous menu level without saving changes.

PAUSE

• Exits service mode

• Press and hold PAUSE for greater than 6 sec will open the Error Log or show the "Stuck Key" message when there are no logged errors.

INCLINE numeric keys

Use as the numeric keypad to type in numeric inputs (access codes etc.).

 

ClosedP80 and P82 touchscreen consoles

The P80 and P82 consoles use the touch sensitive touchscreen controls to select items and navigate the service menus. Only one hardkey "Pause" is used to stop a running diagnostic test.

Follow the on-screen prompts to run the diagnostic tests.

CONSOLE KEY FUNCTION/DESCRIPTION

Touchscreen controls

There are various touch sensitive softkey controls (OK. START, STOP, BACK, etc.) and icon controls (image boxes, buttons, etc.) used to control and operate the console. Make selection by touching the softkey control or icon.

Scroll Up/Dwn

Use your finger to swipe the touchscreen up or down to scroll through menu items. Some menus provide a vertical scroll bar on the screen right side to scroll Up/Dwn.

BACK softkey

• Use the touchscreen BACK softkey to return to the previous menu display.

• Continue selecting the BACK softkey to exit the service software.

PAUSE hardkey

Stop a running diagnostic test.

 

ClosedP62 touchscreen consoles

The P62 console uses a combination of touchscreen softkeys/icons and keypad hardkeys to select and navigate thru the service and diagnostics menus. The P62 uses the BACK keypad button to return to the previous menu and the PAUSE hardkey to stop a running diagnostic test.

Follow the on-screen prompts run the diagnostic tests.

CONSOLE KEY FUNCTION/DESCRIPTION

Touchscreen controls

There are various touch sensitive softkey controls (OK. START, STOP, BACK, etc.) and icon controls (image boxes, buttons, etc.) used to control and operate the console. Make selection by touching the softkey control or icon.

Scroll Up/Dwn

Use your finger to select while swiping your finger Up/Dwn to scroll through menu lists. Some menus provide an on-screen scroll bar to scroll Up/Dwn.

BACK

• On P62 consoles, use the control keypad BACK button to go back or return to the previous menu.

• Continue selecting the BACK hardkey to exit the service software.

PAUSE hardkey

Stop a running diagnostic test.

 

LED Console Standard Service Menus

Standard service menus for LED consoles (P10, P30, P30i and P31).

ClosedLED Console Standard Service Menus

Hardware Validation Diagnostics Tests Menu (51765761)

Service Access Code: 51765761 (see Service Access Codes)

ClosedHardware Validation Diagnostic Tests Menu

menu: Access code (51765761) > Hardware Validation Tests.

The Hardware Validation menu provides a set of automated diagnostic tests and hardware calibration routines used to troubleshoot, calibrate, and verify machine operation. The diagnostic tests are customized for the particular equipment type and console configuration.

DIAGNOSTIC TEST TEST DESCRIPTION

DISPLAY TEST

Tests the console LEDs. Successively press the OK key to verify each group of LEDs and verify that all LEDs illuminate. Press Back to exit the test.

KEYBOARD TEST

An illuminated LED map of the function keys will be shown. Press each individual key and verify that the corresponding LED extinguishes. Press and hold BACK to exit the test.

PVSPersonal Viewing System display. KEY TEST

Not used, OEM test.

HEART RATE

Tests the unfiltered, filtered, and pulse heart rate. Grasp the grips to test the hand held heart rate. Use a Polar heart rate simulator to test the wireless heart rate. Press the BACK button to exit this test.

ACTIVE STATUS LIGHT (1)

The current ASLActive Status Light: Service and maintenance status light. status light state (blue. pulsing blue, yellow, & pulsing yellow).

AS LIGHT BRIGHTNESS (1)

Sets the ASL light brightness level and ON/OFF state: HIGH. MED, LOW, and ON/OFF.

MCMotor controller or motor controller module LIGHT

Shows current state of MC LED-Hold Quick Start to reset.

BELT SPEED TEST

menu: MACHINE TEST > BELT SPEED TEST

Tests belt operating condition in 0.1 speed increments

Test parameters:

• AMPS IN: Treadmill input Current.

• VOLTS IN: Treadmill input Voltage

• VBUSS: Treadmill internal buss Voltage

• AMPS MTR: Current supplied to the drive motor.

AUTO STOP TEST

menu: MACHINE TEST > AUTO STOP TEST

Test parameters;

• Status - Exerciser detected on or off the running belt.

• Step Count - Average # of footplants. Footplant averaging delay reset with each speed change.

.

INCLINE TEST

menu: MACHINE TEST > INCLINE TEST

Test parameters;

• A/D - lift motor incline position potentiometer A/D number.

• SEC - UP/DWN command response delay between the UPCAUpper PCA board and LPCALower printed circuit assembly; generally this refers to the lower board. On treadmills, this is the motor controller unit (MCU), and on self-powered units, it is the main board in the lower section..

• Glitches - Momentary failures in the A/D potentiometer output. If there are more than 50 Glitches, the lift motor should be replaced.

.

STOP KEY TEST

menu: MACHINE TEST > STOP KEY TEST

(P10, P30 consoles only)

Verifies the Stop Key and E-Stop function

Test sequence steps;

1.  StopKey test - Press the Stop Key

2.  Lanyard ESTOP test- Pull the lanyard to trip the emergency stop function.

3.  Exit test - Press the Stop button to reset and exit test.

Notes:  (1) Only used on machines that support the Active Status Light feature.

 

Club Settings Menu (5651565)

Service Access Code: 5651565 (see Service Access Codes)

ClosedClub Settings Menu (5651565)

menu: Club Settings (51765761) > DIAGS - CLUB SETTINGS

CLUB SETTINGS DESCRIPTION

SAFETY CODE

Enabled or disabled. When enabled, a user password (xxxx) is required to use the machine.

Factory default: disabled.

SELECT LANGUAGE

Sets the default language for all workouts on this machine. Language for single use workouts can also be set by the user from the workout options.

Default: English

SET UNITS

Sets units of measure to US standard or Metric.

Range: U.S, Metric
Default: U.S.

SET MAX WORKOUT TIME

Sets the maximum allowable user workout time per session.

Range: 1 to 240 min, NO LIMIT
Default: 60 min

SET MAX PAUSE TIME

Sets how long the equipment remains in a paused banner during a workout before resetting.

Range: 1 to 120 sec (All except EFXElliptical Fitness CrossTrainer)
Range: 1 to  60 sec (EFX only)

Default 30 sec.

SET COOL DOWN TIME

Sets the amount of time that a cool down period will occur at the end of every workout. Factory default is 5 minutes. Settable in 1 minute increments.

Range: 1 to 5 min
Default: 5 min

SET METRICS DEFAULT

Sets a metric that may be of specific importance to the specific facility or fitness trainer. The selected metric will scroll across the screen at regular intervals during the workout.

Default: none

SET SPEED LIMIT

Sets the user maximum speed.

Default: 12 mph

SET INCLINE LIMIT

Sets the user maximum speed.

Default: 15 %

HIDDEN PROGRAMS

Either enabled or disabled*, the setting allows the unit to access specialized fitness tests designed for police, fire fighters and the military.

Default: disabled

REMOTE SPEED CONTROL

Not used.

AUTO STOP CONFIGURE

Sets Auto Stop to On or Off.

Default: ON

MAINT CONFIG

(ASL only) Sets the ASL maintenance counter reminder function ON/OFF (ASL pulsing blue light ON/OFF).

SET CUSTOM PROGRAM 1/2

Sets the use of a customized workout program.
Range: ON/OFF
Default: OFF

Note: The Total Body Workout can only be turned on in this Club Settings menu.

Note:  * not available on all models.

 

Information Display (65)

Service Access Code: 65 (see Service Access Codes)

ClosedInformation Display (65)

Provides the equipment usage, hardware, software, error code, and maintenance information.

INFORMATION DISPLAY DESCRIPTION

ODOMETER

The total number of accumulated miles on the unit.

This value is stored in the upper PCAPrinted circuit assembly, generally referred to as either an upper PCA or lower PCA. in the console so if the PCA is replaced the accumulated miles would start again from "0".

HOUR METER

The total number of hours that the unit took to accumulate unit miles.

This value is stored in the upper PCA in the console so if that PCA is replaced the hours of use would start again from "0".

BELT RATING(2)

(Treadmills Only)

Displays the belt rating from 10 (best) to 0 (worst).

Belt rating ≤ 1 replace the running belt

ASL equipped machines: A belt rating of 0 or 1 will cause a blue pulsing ASL light indicating that there is a problem with the running belt/deck and requires servicing or replacement.

Important: Reset the Belt Rating after replacing with a new running belt and deck ( hold down QuickStart).

MAINT COUNTER

Provides machine next maintenance due remaining mileage or hours. Perform preventative maintenance when the maintenance counter reaches 0.
Press/Hold the PAUSE/RESET key to reset the counter (treadmills reset to 1000 miles, ellipticals reset to 250 Hrs).

U-BOOT SW

The console Upper Boot software version information.

U-BASE SW

The console Upper Base software version information.

METRICS BOARD SW

The console Metrics board software version information

SER NUMBER

Displays the model and serial number of the machine. The base serial number can be set using the WinCSAFE computer software. The factory default is NONE.

USAGE LOG

Displays the type of workout programs the users are accessing most frequently.

Error Log & CPA Event Log

Table of stored error event codes.

TIP: You can quickly access the Error log by holding down the PAUSE key. Will show the STUCK KEY message when there are no logged error codes.

(1) Only available on ASL equipped models.

(2) TRM800-14TRM800 version 2 treadmills mfg. dates 2014 and later., TRM700-16 models

 

Touchscreen Console Standard Service Menus

Standard service menus for Touchscreen consoles (P62, P80, and P82).

ClosedTouchscreen Console Standard Service Menus

Service Menus ( (51765761)

ClosedService Menus (51765761)

Service Access Code: 51765761

Standard service menu access code (51765761) opens to the Settings menu which is the top level service menu providing access to all the equipment service submenus.

ClosedSettings menu

menu: Service Access code (51765761) > Settings

The Settings menu is the top level service menu provideing access to all available equipment service information, diagnostic tests, and maintenance submenus.

SETTINGS MENU DESCRIPTION

About menu

menu: Settings > About

General information about the machine (serial number, name, type, location, software versions, internet & Wi-FiWireless Fidelity - a term defined and Trademarked by the Wi-FiOpen Alliance (formerly known as the Wireless Ethernet Compatibility Alliance - WECA). Wireless LAN equipment carrying the Wi-Fi logo have been interoperability tested for compatibility with one (or more) 802.11 standards, and certified by the Wi-Fi Alliance to be sold under the Wi-Fi brand. connectivity, and the error codes (Event Log or CPA Event Log)

Equipment Usage menu

menu: Settings > Equipment Usage

Machine workout usage information (total workout time & distance, last work start/stop times).

Maintenance menu

menu: Settings > Maintenance

(ASL equipped machines only) Provides the machine maintenance and operating status information.

System Settings menu

menu: Settings > System Settings

Provides settings to configure the console and machine. Also includes the service diagnostic tests.

Software Downloads

menu: Settings > Software Downloads

Settings: ON, OFF

Enables automatic operating system software downloads:

  • ON: Enables automatic operating system software downloads.
  • OFF: Disables automatic operating system software downloads.

Note: Must be connected to the internet and register with PBSPreva Business Suite (Preva® Business Suite).

Partition Configuration

menu: Settings > Partition Configuration

OEM use only, contact Precor Customer Service for information.

(No) Available Updates

menu: Settings > No Available Updates or Available Updates

  • No Available Updates: No available software updates can be read from the USB flash drive.
  • Available Updates: List of available software updates read from the USB flash drive.

Used to update the operating system software. The console reads a software update USB flash drive and then changes the menu from No Available Updates to Available Updates. Select Available Updates to view, select, and upload the software, see How to Update the console operating system software.

 

ClosedAbout menu

menu: Service menu (51765761) > Settings > About

General information about the machine (serial number, name, type, location, software versions, internet & Wi-Fi connectivity, and the event and error codes (Event Log or CPA Event Log).

ABOUT MENU

DESCRIPTION

Event Log

menu: About > Event Log

The Event Log contains all connectivity errors and service maintenance error codes.

.Note: For maintenance service and troubleshooting, use the CPA Event Log and not the Event Log to find the machine maintenance error event codes.

CPA Event Log

menu: About > CPA Event Log

The CPA Event Log only contains the machine maintenance and troubleshooting error event codes that are described in the "Error Code Troubleshooting Guide", see "Error Code Troubleshooting Guide".

.Note: Use the CPA Event Log and not the Event Log to find the machine maintenance and troubleshooting error event codes.

Console Serial Number

menu: About > Serial Number

Console serial number.

Lower Serial Number

menu: About > Serial Number

Base serial number.

Friendly Name

menu: About > Friendly Name

Friendly name assigned to the equipment by the facility.

Location

menu: About > Location

Facility location code.

Release Bundle Version

menu: About > Release Bundle Version

Console System Operating software version. Select to show the component system software versions including: the CPA Software, LPCA, Qt App, Boot Kernel, and File System software versions.

Heartbeat Interval

menu: About > Heartbeat Interval

OEM use only.

Wired MAC Address

menu: About > Wired MAC Address

Wired LANLocal Area Network: A communications network that serves users within a local geographical area, typically over distances of around 100m. Wireless LANs use wireless communicaitons to network devices so there is no need for data cabling. MAC address

WI-FI MAC Address

menu: About > Wi-Fi MAC Address

Wireless Wi-Fi MAC address

Network Time Server1

menu: About > Network Time Server1

NTPNetwork Time Protocol (NTP) is a networking protocol for clock synchronization between computer systems over packet-switched, variable-latency data networks. server address

Machine Type

menu: About > Machine Type

Specifies the detected machine type: TRED, AMTAdaptive Motion Trainer, EFX, UBKUpright Bike, RBKRecumbent Bike.

Legal Notices

menu: About > Legal Notices

Specifies the trademarks. trade names, etc.

 

ClosedEquipment Usage menu

menu: Service menu (51765761) > Settings > Equipment Usage.

Machine workout usage information: cumulative hours & distance, number of workout sessions, & last work start/stop times.

EQUIPMENT USAGE MENU DESCRIPTION

Cumulative Workout Hours

menu: Equipment Usage > Cumulative Workout Distance

Machine total workout hours.

Cumulative Workout Distance

menu: Equipment Usage > Cumulative Workout Distance

Machine total workout distance.

Cumulative Workout Sessions

menu: Equipment Usage > Cumulative Workout Sessions

Machine total number of workout sessions.

Last Workout Start Timestamp

menu: Equipment Usage > Last Workout Start Timestamp

The most recent workout start time.

Last Workout End Timestamp

menu: Equipment Usage > Last Workout End Timestamp

The most recent workout end time.

 

ClosedMaintenance menu

Menu: Service menu (51765761) > Settings > Maintenance

Provides machine maintenance related information including: routine maintenance due status, machine operating condition, and ASL state.

MAINTENANCE MENU DESCRIPTION

Recommended Action menu

menu: Maintenance > Recommended Action

Range: None, Inspect

  • None: No maintenance required.
  • Inspect: Maintenance action required.

Used to report that there is a maintenance issue that requires attention; it could indicate routine maintenance is due or that a machine failure (error code) has occurred that required attention.

» Operating Condition

menu: Maintenance > Operating Condition

Range: Normal, Inspect

  • Normal: No maintenance required.
  • Inspect: There is a routine maintenance issue or failure condition (error code) that requires immediate attention.

.Important: Reset the ASL light state and Motor Controller (MC) status light after repairs a completed.

» Belt Rating

(Treadmills only)

menu: Maintenance > Belt Rating

Range: 10 - 0 (10 - New condition, ≤ 1 - Replace running belt)

On ASL equipped machines: A belt rating of 0 or 1 will cause a blue pulsing ASL light indicating that there is a problem with the running belt/deck and requires servicing or replacement.

Important: Reset the Belt Rating after replacing with a new running belt and deck (select Replace).

» Next Maintenance Due

menu: Maintenance > Next Maintenance Due

Provides machine next maintenance due remaining mileage or hours. Perform preventative maintenance when the maintenance counter reaches 0.

Important: Reset the maintenance interval after completing routine maintenance service, (select Reset). Treadmills reset to 1000 miles, ellipticals reset to 250 Hrs.

Active Status Light (1) (ASL) menu

menu: Maintenance > Active Status Light

Indicates the machine operating and maintenance status.

Blue Solid: Normal operation Indicates that the ASL has not detected any logged error codes.

Blue Pulsing: Preventative maintenance reminder.

      • Treadmills: A belt rating of 0 or 1 will cause a blue pulsing ASL light indicating that there is a problem with the running belt/deck and is in need of servicing or replacement.

       • ALL: The maintenance counter starts at 1000 hours counting down to active use hours to 0 indicating preventative maintenance is due.

Yellow Solid: Indicates an error has occurred, was self-corrected and the machine can be used. The fault can be cleared.

Yellow Pulsing There is a current non-recoverable fault condition, there is a loss of a major function and the machine id out-of-service. Machine service is required.

» AS light Brightness (1)

menu: Maintenance > AS Light Brightness

Range: Low, Medium, High

Set the ASL brightness level.

» Maintenance Reminder

menu: Maintenance > Maintenance Reminder

Range: OFF, ON (default)

Switch the maintenance reminder function ON or OFF.

Notes:  (1) Only used on machines that support the Active Status Light feature.

 

ClosedSystem Settings menu

menu: Service menu (51765761) > Settings > System Settings.

Provides settings to configure the console and machine. Also includes the service diagnostic tests.

SYSTEM SETTINGS MENU DESCRIPTION

System Tests menu

menu: System Settings > System Tests

Machine diagnostics tests to verify system hardware operation, see System Tests menu.

Connectivity menu

menu: System Settings >Connectivity

Connectivity includes Internet network and Preva® Server setup and configuration.

    » Network Type

menu: System Settings > Connectivity > Network Type

Settings: Wired, Wi-Fi
Default: Wired

To connect to a network:

  1. Select Network Type > Wired (or Wi-Fi) > Go.
  2. Select Configure > Configuration > select a network from the list and enter your credentials to access that network.
  3. Select Back to save settings and return to the Connectivity screen.

    » Configuration

menu: System Settings > Connectivity> Configuration

Settings: Automatic (recommended), Manual
Default: Automatic

Specifies internet connection mode.

    » Status

menu: System Settings > Connectivity > Status

Range: Connected, Not Connected

Specifies internet connection status.

    » IP Address

menu: System Settings > Connectivity> IP Address

Specifies console internet IP address.

    » Preva® Server

menu: System Settings > Connectivity>  Preva® Server

Specifies Precor Preva server URL (na.preva.com).

Display menu

menu: System Settings > Display

Console default display configuration settings: language, units, standby delay, .browser and news reader on/off.

    » Default Language

menu: System Settings > Display > Default Language

Default: English

Specifies the default language.

    » Measurement Units

menu: System Settings > Display > Measurement Units

Range: US Standard, Metric

Default: US Standard

Specifies the default measurement units.

    » Standby Mode Delay

menu: System Settings > Display > Standby Mode Delay

Range: 5, 10, 15. 30, 60 minutes

Default: 15 minutes

Specifies the idle wait time before entering standby mode.

    » Browser

menu: System Settings > Display > Browser

Range: ON/OFF

Default: ON

Show (enable) the Browser app.

    » News Reader

menu: System Settings > Display > News Reader

Range: ON/OFF

Default: ON

Show (enable) the News Reader app.

TV Settings menu

menu: System Settings > TV Settings

Configuration TV settings and channel guide.

    » Channel Guide

menu:System Settings > TV Settings > Channel Guide

TV channel configuration.

    » TV Source

menu: System Settings > TV Settings > TV Source

Default: Internal Tuner

TV input signal source

    » Region

menu: System Settings > TV Settings > Region

Specifies the TV input signal modulation format for a particular geographical region.

    » Default Channel

menu: System Settings > TV Settings > Default Channel

Default: Not set

TV default channel.

    » Skip Unnamed Channel

menu: System Settings > TV Settings > Skip Unnamed Channels

Default: ON

Skips over unnamed channels.

    » Skip Encrypted Channel

menu: System Settings > TV Settings > Skip Encrypted Channels

Default: ON

Skips over encrypted channels.

    » Analog Channels Aspect Ratio

menu: System Settings > TV Settings > Analog Channels Aspect Ratio

Range: 4:3, 16:9

Select the analog channel aspect ratio.

    » Extensive Scan

menu: System Settings > TV Settings > Extensive Scan

Default: OFF

Searches all available channel sources.

    » Closed Captioning

menu: System Settings > TV Settings > Closed Captioning

Default: On

Switches close caption feature ON/OFF.

    » Export/Import Channels

menu: TV Settings > Export/Import Channels

Export/Import channel mapping using a USB .flash drive.

Audio Settings menu

menu: System Settings > Audio Settings

Specify the workout duration and equipment Limits for your facility.

    » Default Wired Headphone Volume

menu: System Settings > Audio Settings > Default Wired Headphone Volume

Range: 1 to 15
Default: 6

Sets the default wired headphone jack volume level.

    » Default BluetoothBluetooth is a wireless technology standard for exchanging data over short distances (using short-wavelength UHF radio waves in the ISM band from 2.4 to 2.485 GHz from fixed and mobile devices, and building personal area networks (PANs). Headphone Volume

menu: System Settings > Audio Settings > Default Bluetooth Headphone Volume

Range: 1 to 15
Default: 11

Sets the default bluetooth headphone jack volume level.

Workout Limits menu

menu: System Settings > Workout Limits

Specify the workout duration and equipment Limits for your facility.

    » Maximum Workout Duration

menu:System Settings > Workout Limits > Maximum Workout Duration

Range: 1 to 240 min, NO LIMIT
Default: 60 min

Sets the maximum allowable user workout time per session.

    » Maximum Pause

menu:System Settings > Workout Limits > Maximum Pause

Range: 1 to 300 sec
Default: 30 sec

Sets how long the equipment remains in a paused banner during a workout before resetting.

    » Summary Time Out

menu:System Settings > Workout Limits > Summary Time Out

Sets the time to view the Workout Summary data.

Range: 1 to 120 sec
Default: 60 sec

    » Maximum Speed

menu:System Settings > Workout Limits > Maximum Speed

Default: 12 mph

Sets the user maximum speed.

    » Maximum Incline

menu:System Settings > Workout Limits > Maximum Incline

Default: 15 %

    » Auto Stop(1)

menu:System Settings > Workout Limits > Auto Stop

Default: ON

Sets Auto Stop to On or Off.

Register Equipment menu

menu: System Settings > Register Equipment

Register console and equipment with Precor Preva® Business Suite "PBS".

Required information to register the equipment:

  • Location code
  • Precor technician account name and password
  • Serial number from the base
  • Friendly name assigned to the equipment by the facility (Example: Equipment Type-Floor-Row-Number)

To complete registration for Preva-networked facilities:

  1. Enter the Preva server name (na.preva.com for all sites).
  2. Enter the assigned account name and password.
  3. Follow the onscreen instructions to register the product.

Manage Settings

menu: System Settings > Manage Settings

Save and restore the Connectivity, Display, Media, and Workout Limits settings.

(1) Not available on all models.

 

ClosedSystem Tests menu

menu: Service menu (51765761) > System Settings > System Tests.

Machine diagnostics tests to verify system hardware operation.

SYSTEM TESTS MENU TEST DESCRIPTION

Auto Stop Test

menu: System Tests > Auto Stop Test

Test parameters;

• Status - User detected on running belt

• Step Count - Average # of footplants. Footplant averaging delay reset with each speed change.

Belt Speed Test

menu: System Tests > Belt Speed Test

Tests belt operating condition in 0.1 speed increments

Test parameters:

• AMPS IN: Treadmill input Current.

• VOLTS IN: Treadmill input Voltage

• VBUSS: Treadmill internal buss Voltage

• AMPS MTR: Current supplied to the drive motor.

Incline Test

menu: System Tests > Incline Test

Test parameters;

• A/D - lift motor incline position potentiometer A/D number.

• SEC - UP/DWN command response delay between the UPCA and LPCA.

• Glitches - Momentary failures in the A/D potentiometer output. If there are more than 50 Glitches, the lift motor should be replaced.

USB Test

menu: System Tests > USB Test

List the active USB ports.

Touchscreen Test

menu: System Tests > Touchscreen Test

Verify touchscreen display.

Touchscreen Calibration

menu: System Tests > Touchscreen Calibration

Calibrates touchscreen finger press operation.

Backlight Test

menu: System Tests > Backlight Test

Tests the display backlight performance.

RGB Test

menu: System Tests > RGB Test

Tests the display color performance.

Numeric Backlight Test

menu: System Tests > Numeric Backlight Test

Tests the movement controls LCD numeric displays backlight brightness level.

Numeric Display Test

menu: System Tests > Numeric Display Test

Tests the movement controls LCD numeric displays.

Heart Rate Test

menu: System Tests > Heart Rate Test

Tests the handlebar unfiltered, filtered, and pulse heart rate. Grasp the grips to test the hand held heart rate. Use a Polar heart rate simulator to test the wireless heart rate. Press the back button to exit this test.

 

Club Settings (5651565)

ClosedClub Settings (5651565)

Service Access Code: 5651565

On P62, P80, and P82 touchscreen consoles, Club Settings menu is used by club operators to configure the equipment workouts and to help manage equipment service.

Club Settings Menus

 

Information Display (65)

Closed Information Dispay (65)

Information Display (65): Not supported

The Information Display (65) service menu found on LED consoles (P10, P30, P30i and P31) is NOT supported on touchscreen consoles (P62, P80, and P82).

Refer to the following touchscreen console service menus for similar equipment information:

 

 

 

 

 

Contact Precor Customer Support (Ph 800.786.8404) with any questions.

Copyright 2010 Precor Incorporated